TestNav 8

Page tree

Search TestNav 8 Online Support:

  • Created by user-6d962, last updated on Apr 15, 2023 4 minute read

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 22 Next »

This page pertains to ONLY Vermont and pilot programs using ADAM for their assessment management system and ChromeOS testing devices, and NOT using web extensions.

Progressive web apps (PWAs) are web applications that use progressive enhancements. Users can open PWAs from the user’s home screen. PWAs run in a standalone window, and users see the same TestNav user interface (UI).

During BOTH the infrastructure trial and the actual test, note which specific device each student uses during each test. The TestNav app saves SRFs to only one designated place on the testing device. If an error occurs, you can locate files only on that specific device.

Install TestNav PWA

To install TestNav PWA , first ensure each device's settings are set to keep local data to avoid accidentally deleting the SRF and log files. Then, you add TestNav as a kiosk app. 

Content filters and TestNav...

If your content filters are activated when a student signs in to the Chrome device, contact Pearson Support for additional URLs to add to your kiosk settings for URL blocking. TestNav does not require that the student sign in to the Chrome device. As a result, these content filters do not filter as intended during a TestNav test.

Step-by-Step

  1. Sign in to the Google Admin console for your domain, using your administrator account (does not end in @gmail.com).

  2. From the Google Admin console home page, go to Devices > Chrome > Apps & extensions > Kiosks.

  3. Under Organizational Units, select the top-level organization that you want to apply these settings to. Then, select a child organization, if necessary. In the example below, Pearson is selected to give all Chromebooks within the Pearson organization access to TestNav. 
  4. Click the Add by URL icon.
  5. Add the following URL: home.testnav.com#:standalone:
  6. Click Save.

  7. Chrome displays the message, Note: Adding Web Apps in Kiosk. Select Agree.

  8. Click Save again.

Sign in to TestNav

  1. Power on the device, but do not log in.
  2. In the lower left of the screen, select Apps > Home - TestNav to launch the TestNav PWA.

  3. If you have not already done so, choose the appropriate icon for your test on the home page. If your test was selected before the test session, you see the Sign In page, rather than the home page.  

    1. If you need to select a different test, click the user dropdown menu at the upper-right of the page, and click Choose a different customer.

    2. Click the appropriate icon for your test.

  4. Start a test to ensure that you can do so without error, using ADAM test card credentials.
  5. To shut down and exit kiosk mode after the app launches, hold down the Power button.

Find and Set Up Response File Backups

TestNav has a default primary SRF save location for all computers and devices. For detailed information on saved response files (SRFs) and log files, see Understand SRFs and Log Files.

SFTP configuration is not supported by all assessment management systems. Consult your assessment management system user guide to determine whether the SFTP option is available.

Prior to testing, complete the following steps:

  1. Familiarize yourself with the default primary save location.

  2. Configure the secondary save location through your assessment management system. 
    The same secondary save location applies to all computers and devices. You only need to set this configuration one time.  

  3. Communicate SRF and log file locations/procedures to proctors (see Primary Save Location below).

  4. Note which student tests on which device during infrastructure trials and on test days.

Primary Save Location

On ChromeOS, the SRF default primary save location is not customizable. 

To find files on ChromeOS:

  1. Open the TestNav PWA app from TestNav - Home.
  2. Focus your cursor in the username or password field.
  3. Press <ctrl><shft>z, and the File Viewer box appears.
    If the File Viewer does not display, click on the window and then press <ctrl><shft>z again.
  4. Plug in a USB memory stick.
  5. Click the download button next to the srf and log file(s) you want to download.
  6. When the window opens, select the USB memory stick, and click Save.

Run an Infrastructure Trial

Pearson strongly recommends running an infrastructure trial to verify the technology setup is complete and to familiarize teachers and students with the test. Use your training site through your assessment management system to complete the trial before the actual test day.

Related Information

You can learn more about SRF and log files on the Set Up and Use TestNav page.

Tiny link: https://support.assessment.pearson.com/x/CYJHBg
  • No labels