Page tree

Search TestNav 8 Online Support:

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 15 Next »

Unable to render {include} The included page could not be found.

To set up iPads in your testing environment, complete the following:

This checklist provides ordered steps that correspond to the sections on this page. You can click each link to go directly to the corresponding section. 

  1. Download the app from the applicable store, and install TestNav using the instructions below.
  2. Turn off auto-correct and predictive text.
  3. Start TestNav to verify app opens and that you can start your test.
  4. Download ProctorCache and install it on your proctor caching computer(s).
  5. Run SystemCheck on each device.
  6. Review the Find Response File Backups section to prepare yourself to find saved response files (SRF) and log files before the testing session. 
  7. Communicate SRF and log file locations and download information to test proctors.
  8. Run an infrastructure trial.

During BOTH the infrastructure trial and the actual test, note which specific iPad each student uses during each test. The TestNav app saves SRFs to only one designated place on the testing device. If an error occurs, you can locate files only on that specific device.

Install TestNav

You can set up TestNav on an iPad for secure testing using one of the following methods:

 Apple Configurator via USB

To enable single app mode on iPad using Apple Configurator, first back up the device to retain any data or applications. Then, turn on Supervised mode for your organization to wipe the device.

You may restore the iPad after testing by placing the iPad in Supervised mode to put data and apps back on the device.

  1. Connect the iPad to a Mac OS X computer using a USB connection.
  2. On the Mac OS X computer, run Apple Configurator.
  3. On the Configurator's Prepare tab, turn on Supervision.
  4. Click the Prepare button at the bottom of the window.
  5. If prompted, enter the appropriate organization information and click Done.
  6. When you are asked to confirm that you want to apply the settings, click Apply.
  7. Wait while the Configurator completes the updates. When complete, click the Supervise tab.
  8. From the Lock to App drop-down menu, select TestNav.
  9. Click Apply at the bottom of the window.

To release a device from the single app mode:

  1. Confirm that the device is connected to the Mac OS X Server. 
  2. From the Lock to App drop-down menu, select None.
  3. Click Apply at the bottom of the window.
 Apple Profile Manager

Administrators can use Mobile Device Manager (MDM) to push a profile to devices to wirelessly turn on/off single app mode.

Profile Manager is Apple's MDM solution for Mac OS X. You can select the TestNav app from the Lock to App menu and push the profile to supervised devices.

 Autonomous Single App Mode

You can also use autonomous single app mode (ASAM) to set up iPad for secure testing. ASAM is the recommended solution for LEAs to manage single app mode because it reduces administrator workload.

The ASAM feature requires BOTH a Supervised iPad (which you enable only from Apple Configurator) and an MDM (either Profile Manager or third-party). With ASAM, TestNav turns Guided Access on and off, as each testing scenario requires.

Administrators do not need to push profiles to devices to turn on/off single app mode. Instead administrators can grant TestNav the ability to turn on single app mode on-demand.

 Guided Access Mode - iOS 8
  1. Rotate the iPad to landscape orientation.
  2. Tap Settings > General > Accessibility > Guided Access.
    • Turn on Guided Access.
    • Set Passcode.
    • Tap Accessibility Shortcut.

Using TestNav with Guided Access (iOS 8)

  1. Start the TestNav app.
  2. Triple click the Home button and enter the passcode.
  3. Tap Options.
    • Turn off Sleep/Wake.
    • Turn on Volume Buttons setting.
    • Turn off Motion to lock iPad to landscape mode.
    • Turn on Touch setting.
  4. Tap Start.

Exiting TestNav/Closing Guided Access mode

  1. Triple-click the Home button.
  2. Enter the passcode.
  3. Tap end in the upper left-hand corner.

When using iPads on iOS 8 for secure testing, turn off Auto-Correction and Predictive text:

  1. Tap Settings > General > Keyboard > Auto-Correction, and slide left to turn off. 
  2. See Predictive on the same screen, and slide left to turn off.

Start TestNav

If you have not already done so,

  1. Start the TestNav app.
  2. On the TestNav home page, select your test.

Unable to render {include} The included page could not be found.

Unable to render {include} The included page could not be found.

Primary Save Location

On iPads, the SRF default primary save location is not customizable. 

You can find SRF and log files two ways on iPads - using Safari or a USB cable.
  1. Open Safari and enter the url: testnav://admin
    Note that the first time you access this, a dialog asks if you want to open in TestNav. Tap Open to open TestNav.
  2. Click View Logs or View Student Responses.
  3. From this screen, you can view and email SRF and log files.
  4. Click the Home button when finished.
  1. Connect the iPad to the computer using a USB cable.
  2. Start iTunes, version 9.1 or later.
  3. Click iPad from the listed devices in the iTunes window.
  4. Click the Apps tab and then scroll down to the bottom of the page. 
  5. View the list of apps currently installed on the iPad under File Sharing.
  6. Select the TestNav App. A list of TestNav log files displays under TestNav Documents.
  7. Select and open the SRF or log file you want to view.

Unable to render {include} The included page could not be found.


  • No labels