TestNav 8
Page tree

Search TestNav 8 Online Support:

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 37 Next »

For step-by-step setup instructions, click the links below. You can also read further on this page for a detailed overview on installable TestNav, SystemCheck, and saved response file (SRF) and log files.

You download and install the TestNav app on testing devices, and click the appropriate icon for your test from the TestNav Home page. Testing devices lock down when the TestNav app launches to ensure that students cannot access any other apps or sites.

Understand App Check with Installable TestNav

App Check confirms that the device or computer is running a supported operating system (OS) and OS version. After it checks the OS, App Check confirms that the device or computer is configured to launch TestNav in kiosk mode. You must run App Check on every device in your testing environment. See the Run App Check section on each device setup page for detailed instruction.

Understand SRF and Log Files

When a student responds to a test question, TestNav saves the response in a saved response file (SRF) and sends these responses to the Pearson server. After the responses successfully save to the Pearson server, TestNav deletes the SRF. 

 TestNav also writes to a log file during the testing session. These files help Pearson troubleshoot issues, if they occur. 

For Windows and Mac OS X, you must configure student accounts to have complete read, write, and delete access in all save locations. Pearson strongly recommends that you configure a shared network folder that can be accessed from all testing computers as a secondary save location for SRFs to ensure that you do not lose responses, even if a student cannot continue to test on the same computer. You must verify that you can access the location from multiple testing computers.

You cannot configure the log file save location.

Secondary Save Location

You can place backup SRFs in a directory on the network file server, on the student's testing computer, or on a secure file transfer protocol (SFTP) site. The following table outlines the pros and cons of each option; however, as a best practice, Pearson recommends using two options - one for a primary save location (browser-based and the TestNav app) and the other for the secondary save location. 
Back up location options
Pros
Cons
Directory on network computerBackup file is accessible from other computers.
  • Uses more internal network bandwidth.
  • Responses save to the network drive more slowly than to the local directory. As a result, test items take more time to load.
  • Does not provide secondary save for the devices below:
    • Android devices
    • Chromebooks
    • iPads
Local directory on testing computer (TestNav client)
  • Uses less internal network bandwidth.
  • Responses save to local directory more quickly than to the network drive. As a result, test items take less time to load.
  • Backup file is not accessible from any other computer.
  • Does not provide secondary save for the devices below:
    • Android devices
    • Chromebooks
    • iPads

SFTP

Note: SFTP configuration is not supported by all assessment management systems. Consult your assessment management system user guide to determine whether the SFTP option is available.

Provides secondary save location for all supported testing computers and devices.Requires SFTP site setup.

You should familiarize yourself with default response file backup locations. Some save locations are configurable. See each setup page for details and instructions.

If you set a network file server as a primary or secondary backup location, do not use:

  • spaces in the save location path.
  • a location that requires authentication. If authentication is required, TestNav cannot access the shared location.
  • a Windows UNC (Uniform Naming Convention) or network path, such as \\ComputerName\SharedFolder\Resource on a Mac or Linux. Pearson recommends that you specify a mapped drive location, such as D:\TopDirectory\NextDirectory\SaveLocation.

 

Summer 2016 Update

A TestNav 8 required update comes available in summer 2016. Users must take updated versions, or TestNav will display error message ####.

The table below shows how each installable app updates.

Installable TestNav AppUpdate Behavior/Required Action
Android appAuto update* - No action required.
Chrome appAuto update* - No action required.
iOS appDownload updated version from App Store and reinstall.
TestNav DesktopDownload updated version from http://download.testnav.com.

*Unless the auto-update feature is disabled. If disabled, download updated versions from the appropriate app store.

 

 

  • No labels